Examples of errors detected by the V616 diagnostic
V616. Use of 'Foo' named constant with 0 value in bitwise operation.
Mozilla Firefox
V616 The 'eBorderStyle_none' named constant with the value of 0 is used in the bitwise operation. nswindow.cpp 2278
enum nsBorderStyle {
eBorderStyle_none = 0,
....
};
NS_IMETHODIMP
nsWindow::SetNonClientMargins(nsIntMargin &margins)
{
if (!mIsTopWidgetWindow ||
mBorderStyle & eBorderStyle_none ||
mHideChrome)
return NS_ERROR_INVALID_ARG;
....
}
Most likely this is what should be written here: mBorderStyle != eBorderStyle_none
LibreOffice
V616 The 'WW8_TOP' named constant with the value of 0 is used in the bitwise operation. ww8par6.cxx 4742
enum BRC_Sides
{
WW8_TOP = 0, WW8_LEFT = 1, WW8_BOT = 2,
WW8_RIGHT = 3, WW8_BETW = 4
};
void SwWW8ImplReader::Read_Border(....)
{
....
if ((nBorder & WW8_LEFT)==WW8_LEFT)
aBox.SetDistance(
(sal_uInt16)aInnerDist.Left(), BOX_LINE_LEFT );
if ((nBorder & WW8_TOP)==WW8_TOP)
aBox.SetDistance(
(sal_uInt16)aInnerDist.Top(), BOX_LINE_TOP );
if ((nBorder & WW8_RIGHT)==WW8_RIGHT)
aBox.SetDistance(
(sal_uInt16)aInnerDist.Right(), BOX_LINE_RIGHT );
if ((nBorder & WW8_BOT)==WW8_BOT)
aBox.SetDistance(
(sal_uInt16)aInnerDist.Bottom(), BOX_LINE_BOTTOM );
....
}
Unreal Engine 4
V616 The 'SolidMesh' named constant with the value of 0 is used in the bitwise operation. debugrendersceneproxy.cpp 156
enum EDrawType
{
SolidMesh = 0,
WireMesh = 1,
SolidAndWireMeshes = 2,
};
void FDebugRenderSceneProxy::GetDynamicMeshElements(....) const
{
....
if (DrawType & SolidAndWireMeshes || DrawType & SolidMesh)
{
GetCylinderMesh(....);
}
....
}
Similar errors can be found in some other places:
- V616 The 'SolidMesh' named constant with the value of 0 is used in the bitwise operation. debugrendersceneproxy.cpp 169
- V616 The 'SolidMesh' named constant with the value of 0 is used in the bitwise operation. debugrendersceneproxy.cpp 183
- V616 The 'SolidMesh' named constant with the value of 0 is used in the bitwise operation. debugrendersceneproxy.cpp 197
- And 1 additional diagnostic messages.
Unreal Engine 4
V616 The 'DT_POLYTYPE_GROUND' named constant with the value of 0 is used in the bitwise operation. pimplrecastnavmesh.cpp 2006
enum dtPolyTypes
{
DT_POLYTYPE_GROUND = 0,
DT_POLYTYPE_OFFMESH_POINT = 1,
DT_POLYTYPE_OFFMESH_SEGMENT = 2,
};
uint8 GetValidEnds(...., const dtPoly& Poly)
{
....
if ((Poly.getType() & DT_POLYTYPE_GROUND) != 0)
{
return false;
}
....
}
Mozilla Thunderbird
V616 The 'eBorderStyle_none' named constant with the value of 0 is used in the bitwise operation. nswindow.cpp 2318
enum nsBorderStyle
{
eBorderStyle_none = 0,
....
}
NS_IMETHODIMP nsWindow::SetNonClientMargins(....)
{
if (!mIsTopWidgetWindow ||
mBorderStyle & eBorderStyle_none)
return NS_ERROR_INVALID_ARG;
....
}
Similar errors can be found in some other places:
- V616 The 'nsIDocShell::BUSY_FLAGS_NONE' named constant with the value of 0 is used in the bitwise operation. presentationcallbacks.cpp 105
ReactOS
V616 The '(mdtModule)' named constant with the value of 0 is used in the bitwise operation. assembly.c 156
typedef enum CorTokenType
{
mdtModule = 0x00000000,
mdtTypeRef = 0x01000000,
....
mdtModuleRef = 0x1a000000,
mdtTypeSpec = 0x1b000000,
mdtAssembly = 0x20000000,
mdtAssemblyRef = 0x23000000,
....
} CorTokenType;
#define TypeFromToken(tk) ((ULONG32)((tk) & 0xff000000))
#define TableFromToken(tk) (TypeFromToken(tk) >> 24)
static inline ULONG get_table_size(....)
{
INT tables;
....
tables = max(
assembly->tables[TableFromToken(mdtModule)].rows, // <=
assembly->tables[TableFromToken(mdtModuleRef)].rows);
....
}
LLVM/Clang
V616 The 'SymbolRef::ST_Unknown' named constant with the value of 0 is used in the bitwise operation. MachODebugMapParser.cpp 448
enum Type {
ST_Unknown, // Type not specified
ST_Data,
ST_Debug,
ST_File,
ST_Function,
ST_Other
};
void MachODebugMapParser::loadMainBinarySymbols(....)
{
....
SymbolRef::Type Type = *TypeOrErr;
if ((Type & SymbolRef::ST_Debug) ||
(Type & SymbolRef::ST_Unknown))
continue;
....
}
Most likely this is what should be written here: if ((Type == SymbolRef::ST_Debug) || (Type == SymbolRef::ST_Unknown))
CMaNGOS
V616 The 'SPELL_DAMAGE_CLASS_NONE' named constant with the value of 0 is used in the bitwise operation. Spell.cpp 674
enum SpellDmgClass
{
SPELL_DAMAGE_CLASS_NONE = 0, // <=
SPELL_DAMAGE_CLASS_MAGIC = 1,
SPELL_DAMAGE_CLASS_MELEE = 2,
SPELL_DAMAGE_CLASS_RANGED = 3
};
void Spell::prepareDataForTriggerSystem()
{
....
if (IsPositiveSpell(m_spellInfo->Id))
{
if (m_spellInfo->DmgClass & SPELL_DAMAGE_CLASS_NONE) // <=
{
m_procAttacker = PROC_FLAG_DONE_SPELL_NONE_DMG_CLASS_POS;
m_procVictim = PROC_FLAG_TAKEN_SPELL_NONE_DMG_CLASS_POS;
}
}
....
}
Similar errors can be found in some other places:
- V616 The 'SPELL_DAMAGE_CLASS_NONE' named constant with the value of 0 is used in the bitwise operation. Spell.cpp 692
Qt
V616 CWE-480 The 'QAbstractItemView::NoSelection' named constant with the value of 0 is used in the bitwise operation. itemviews.cpp 976
enum SelectionMode {
NoSelection,
SingleSelection,
MultiSelection,
ExtendedSelection,
ContiguousSelection
};
void QAccessibleTableCell::unselectCell()
{
QAbstractItemView::SelectionMode selectionMode = view->selectionMode();
if (!m_index.isValid() || (selectionMode & QAbstractItemView::NoSelection))
return;
....
}
Qt
V616 CWE-480 The 'CursorShowing' named constant with the value of 0 is used in the bitwise operation. qwindowscursor.cpp 669
class QWindowsCursor : public QPlatformCursor
{
public:
enum CursorState {
CursorShowing,
CursorHidden,
CursorSuppressed
};
....
}
QWindowsCursor::CursorState QWindowsCursor::cursorState()
{
enum { cursorShowing = 0x1, cursorSuppressed = 0x2 };
CURSORINFO cursorInfo;
cursorInfo.cbSize = sizeof(CURSORINFO);
if (GetCursorInfo(&cursorInfo)) {
if (cursorInfo.flags & CursorShowing)
....
}
Minetest
V616 The '(FT_RENDER_MODE_NORMAL)' named constant with the value of 0 is used in the bitwise operation. CGUITTFont.h 360
typedef enum FT_Render_Mode_
{
FT_RENDER_MODE_NORMAL = 0,
FT_RENDER_MODE_LIGHT,
FT_RENDER_MODE_MONO,
FT_RENDER_MODE_LCD,
FT_RENDER_MODE_LCD_V,
FT_RENDER_MODE_MAX
} FT_Render_Mode;
#define FT_LOAD_TARGET_( x ) ( (FT_Int32)( (x) & 15 ) << 16 )
#define FT_LOAD_TARGET_NORMAL FT_LOAD_TARGET_( FT_RENDER_MODE_NORMAL )
void update_load_flags()
{
// Set up our loading flags.
load_flags = FT_LOAD_DEFAULT | FT_LOAD_RENDER;
if (!useHinting()) load_flags |= FT_LOAD_NO_HINTING;
if (!useAutoHinting()) load_flags |= FT_LOAD_NO_AUTOHINT;
if (useMonochrome()) load_flags |=
FT_LOAD_MONOCHROME | FT_LOAD_TARGET_MONO | FT_RENDER_MODE_MONO;
else load_flags |= FT_LOAD_TARGET_NORMAL; // <=
}
Qemu
V616 The 'TIMER_NONE' named constant with the value of 0 is used in the bitwise operation. sys_helper.c 179
#define HELPER(name) ....
enum {
TIMER_NONE = (0 << 30),
....
}
void HELPER(mtspr)(CPUOpenRISCState *env, ....)
{
....
if (env->ttmr & TIMER_NONE) {
....
}
}
Dlib
V616 The 'NO_KEYWORD' named constant with the value of 0 is used in the bitwise operation. fonts.cpp 288
class bdf_parser
{
public:
enum bdf_enums
{
NO_KEYWORD = 0,
STARTFONT = 1,
....
ENDCHAR = 512,
ENDFONT = 1024
};
....
bool parse_header( header_info& info )
{
....
while ( 1 )
{
....
if ( res & NO_KEYWORD ) // <=
return false; // parse_error: unexpected EOF
break;
}
....
};
Similar errors can be found in some other places:
- V616 The 'NO_KEYWORD' named constant with the value of 0 is used in the bitwise operation. fonts.cpp 334
Chromium
V616 The 'extensions::Extension::NO_FLAGS' named constant with the value of 0 is used in the bitwise operation. extensions_internals_source.cc 98
base::Value CreationFlagsToList(int creation_flags)
{
base::Value flags_value(base::Value::Type::LIST);
if (creation_flags & extensions::Extension::NO_FLAGS) // <=
flags_value.Append("NO_FLAGS");
if (creation_flags & extensions::Extension::REQUIRE_KEY)
flags_value.Append("REQUIRE_KEY");
if (creation_flags & extensions::Extension::REQUIRE_MODERN_MANIFEST_VERSION)
flags_value.Append("REQUIRE_MODERN_MANIFEST_VERSION");
if (creation_flags & extensions::Extension::ALLOW_FILE_ACCESS)
flags_value.Append("ALLOW_FILE_ACCESS");
....
return flags_value;
}